- 2 operating modes can be selected (stereo or bridged)
- Limiter, switchable
- Speaker switch-on delay
- 2 level controls
- Each channel with LED for activated protective circuit (protect) and output meter with clip LED
- Complete protection set against short-circuit, overheat, DC voltage, power on/off transients
- Groundlift switch against humming
- Fan cooling
- Signal inputs via XLR or 6.3mm jack connectors
- Speaker outputs via lockable speaker jacks and pairs of screw terminals
- Additional Speaker plug for 8-ohm bridge operation
- Class AB circuitry
- Rack installation with 2 units
Power supply: | 115/230 V AC, 50/60 Hz |
Power output sine: | |
Stereo 4 ohms | 2 x 350 W |
Stereo 8 ohms | 2 x 240 W |
8 ohms bridged | 1 x 700 W |
Frequency range: | 20-20000 Hz, ±1 dB |
Damping factor: | >350 |
Distortion factor: | 0.5 % |
Slew rate: | 20 V/µsec |
S/N ratio: | >95 dB |
Input sensitivity: | 1.4 V |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input voltage: | max. 21 dBV/9V |
Input connectors: | 2 x XLR, 2 x 6.3 mm jack |
Output connectors: | 2 x speaker, 1 x speaker (bridge), 2 x pairs of screw terminals |
Control elements: | power switch, level control per channel, mode switch (stereo/bridged), limiter selector, groundlift selector |
LED indicators: | bridged, protect, and 5-fold output meter with clip LED (per channel) |
Protection circuits: | short-circuit, overheat, DC voltage, power on/off transients, softstart |
Construction: | steel chassis with steel front panel |
Dimensions (DxWxH): | 354 x 483 x 103 mm (19″, 2 U) |
Weight: | 9,80 kg |
Power consumption: | 495 W 1/8 power |
Power/channel (8 Ohm): | 240 W |
Power/channel (4 Ohm): | 350 W |
Height: | 8,9 cm |
Depth: | 35,4 cm |
Width: | 48,3 cm |