Audio technica Beltpack System with ATR35cW

Overall System
Operating Frequencies	F-Band: 824 – 831 MHz, 863 – 865 MHz
Number Of Channels	2 x 4 frequencies
Frequency Stability	+/- 0.005%, Phase lock loop frequency control
Modulation Mode	FM
Frequency Response	60 Hz – 16 kHz
Operating Range	60m, typical

Receiver
Receiving System	Antenna switching diversity
Image Rejection	55dB minimum
Dynamic Range	HH: 108 dB, BP 103 dB (@ max deviation)
Sensitivity	10dBµV (S/N 60dB @ 20 kHz deviation)
Total Harmonic Distortion	<1% – 20 kHz deviation @ 1 kHz
Audio Output Unbalanced	-2dBV
Audio Output Balanced	4dBV
Output Connectors (Microphone)	Balanced: XLRM-type
Output Connectors (Instrument)	Unbalanced: 6.3 mm mono jack
Maximum Output Level	Mic / Line (0 / -20dB)
Antenna Input	BNC type, 50 – BIAS voltage 12V DC 100mA each
Dimensions	200 mm x 42 mm x 122 mm (W x H x D)
Weight	418 g without accessories
Accessories Included	AC Adapter, Antennas, Rack mount adapter, protective carrying case

Belt Pack
RF Power Output	10 mW
Spurious Emissions	Following national regulations
Input Connections	Pin 1: GND Pin 2: INST Pin 3: Mic Pin 4: DC Bias +10V
Battery Type	Two 1.5V AA alkaline (not included)
Battery Life	10 hours – depending on battery type and use pattern
Dimensions	66 mm x 98 mm x 22 mm (W x H x D)

Brand	Audio-technica